USER'S MANUAL
2
Connecting and disconnecting from PC
•
To hear sound from normal soundcard/speakerset, disconnect USB headset from PC.
•
Do not connect or disconnect Headset while playing DVD/Games/Music on PC.
•
Preferably reconnect Headset to the same USB port.
•
If connected to different USB port, repeat steps 7 to 14.
•
When no sound is heard through the headset it might be necessary to set USB headset to default
Windows audio device.
Table 1: Technical Information
Mode
Samplerates (Khz)
Max. resolution
Supported Standards
Playback
48, 44.1
16bit
Digital audio, 6 Channel, Full Duplex
Recording
48, 44.1
16bit
Digital audio, Mono
Midi
Microsoft GS Wavetable SW Synth
Gaming
48, 44.1
16bit
EAX 1-2. Aureal3D 1.0 , Direct sound 3D
Safety
•
This device can produce a sound of a high volume. Always increase the volume slowly.
•
Never open or repair this device yourself.
•
Do not use the device in a damp environment. Clean the device with a dry cloth.
•
This device meets the essential requirements and other relevant conditions of the applicable European
directives. The Declaration of Conformity (DoC) is available at www.trust.com/14804/ce
•
If possible, dispose of the device at a recycling centre. Do not dispose of the device with the household
waste
Warranty & copyright
•
This device has a two-year product warranty which is valid from the date of purchase. Go to
www.trust.com/warranty
for more information.
•
It is forbidden to reproduce any part of this instruction manual without the permission of Trust
International B.V.
