22
23
B
The detection area screen will open. Here
you can select the area in which the camera
must detect motion. It is possible to setup three
different areas in which the camera must detect
motion.
To select the desired area press on the red
square on the bottom of the screen. Now draw
the detection area in the picture on your screen.
To setup another detection area select another
color box on the bottom of your screen and draw
another detection area on the screen.
C
To confirm the detection areas press the
confirmation button on the top of your screen.
If only one detection area is needed then press
again on the colorbox which you want to remove
on the bottom of your screen (blue and green).
After confirming the detection areas the app will
return to the settings screen.
B
C
IPCAM-3000 OUTDOOR CAMERA
IPCAM-3000 OUTDOOR CAMERA
13.4
Notification interval
It is possible to change the time between push
notifications after motion is detected
A
To change the time between notifications
press Notification interval.
B
A list is shown of the notification intervals.
Select the desired notification interval.
After selecting the notification interval the app
will return to the settings screen.
A
B
Summary of Contents for IPCAM-3000
Page 18: ...www trust com ...