TRUST 500FX POWERC@M FLASH
20
3.
Fill in your first name, last name and e-mail address and then click on ‘Next’.
4.
Select ‘Built-in Mail Utility’ and fill in your ‘Mail Server’ information (given to
you by your ISP) and your ‘account name’. Click on 'OK' to continue.
5.
Select ‘Trust 500FX POWERC@M FLASH Video Capture’ as the ‘Video
capture device’ and select the desired frames per second (fps). Click on ‘Test
It?’ to compare the image. Click on the square stop button to stop the test.
6.
Click on ‘Set-up’ if you wish to alter the camera settings. Select ‘Format’ to
alter your camera’s image format. Select ‘Source’ from the menu if you wish
to alter the settings. Here, it is also possible to set the electric mains
frequency. This is 220 V/50 Hz for Europe.
7.
Click on ‘Next’ after you have adjusted all the settings as desired.
8.
Click on ‘Next’ to configure the audio settings. The ‘Audio Configuration’
window will appear.
9.
Click on ‘Press Here to Test Speaker’ to test the output volume of your
speakers. Move the slide bar to adjust the volume.
10.
Click on ‘Next’ once the settings are correct and you wish to continue with the
configuration.
11.
Click on the red button to make a recording. Click on the black square to stop
the recording. Click on the black triangle to listen to the recording. The
recording level can be altered using the slide bar.
12.
Click on ‘Next’ once the settings are correct and you wish to continue with the
configuration.
13.
Click on 'Finish' to complete the configuration of VideoLive Mail.
14.
You have now completed configuring VideoLive Mail. You can now use the
program. If you wish to change the settings, you can do so using the ‘Setup
Wizard’ (‘Start - Programs - Cyberlink VideoMail 4.0’).
Note
:
You must have a sound card and a microphone installed to be able to
use the audio settings.
9.5.2
Recording and sending videos
Now you have completed the once-only settings in chapter 9.5.1 concerning your
Internet Service provider, an explanation is given below of how you can easily record
a short film and send it immediately via e-mail.
1.
Click on ‘Start – Programs – Cyberlink VideoLive Mail 4.0 – VideoLive Mail’.
2.
Video Live Mail will start.
3.
Click on the round ‘Record’ button to start recording.
4.
Click on the square ‘Stop’ button when you wish to stop the recording.
5.
Click on the ‘E-mail’ button to send the recording immediately.
6.
The ‘Summary’ window will appear.
7.
Here, you can include information with your recording. Next, click on ‘OK’.
8.
The recording will now be automatically linked to your default e-mail program.
9.
Send the e-mail as you would any other e-mail using this program.
9.5.3
Saving a video recording
1.
Click on ‘Start – Programs – Cyberlink VideoLive Mail 4.0 – VideoLive Mail’.
2.
Click on the round ‘Record’ button to start recording.
3.
Click on the square ‘Stop’ button when you wish to stop the recording.
4.
Click on ‘Save Video File’.
5.
The ‘Summary’ window will appear.
6.
Here, you can include information with your recording. Next, click on ‘OK’.
7.
A standard Windows ‘Save As’ window will appear. In this window, you can
indicate which folder you wish to save the video file in, you can give the file a
name and indicate which format you wish to save the file in.
