Trust Precision Viewer Monitor
7
GB
6.2.1 Adjusting the brightness
Push button 3
to change the brightness. The value can be decreased using button 3 (
▼
) and increased
using button 4 (
▲
).
6.2.2 Adjusting the contrast
Press button 4
to change the contrast. The value can be decreased using button 3 (
▼
) and increased
using button 4 (
▲
).
6.2.3 Other
settings
Click on the 'Menu' button (see Figure 4). Figure 5 will appear. The upper line displays the current resolution
as well as the current horizontal and vertical refresh rates.
Note:
You cannot change the resolution or the refresh rate in the OSD menu. See chapter 5 for
instructions on how to do this.
Figure 5: OSD menu
•
Use buttons 3 (
▼
) and 4 (
▲
) to scroll through the OSD menu.
•
Click on 'Select' to select the item you wish to change.
•
You can change the value of the selected function using buttons 3 (
▼
) and 4 (
▲
). The information will be
automatically saved 4 seconds after the last alteration.
•
Click on 'Select' again to return to the OSD menu and continue scrolling through the functions.
•
Click on 'Menu' to leave the OSD menu. The OSD menu will close automatically if it is not used for
approximately 8 seconds.
Function 17” 19” Description
9
9
Adjusts the horizontal size of the image.
9
9
Adjusts the horizontal position of the image.
9
9
Adjusts the vertical size of the image.
9
9
Adjusts the vertical position of the image.
9
9
Corrects the pincushion distortion.
9
9
Corrects the trapezoid distortion.
