OXXTRON 1000VA UPS
– User’s Manual
2
Package contents (Package contents)
On/Off button
Status LEDs:
Red
Yellow
Green
AC input port
Fuse holder
Output
Loop through cables (2x)
Installation (Installation)
-
Turn off your computer.
-
Disconnect the AC input cables from your computer and from its monitor.
-
Connect your computer’s AC input cable to the UPS’ AC input port ( ).
-
Use loop through cables ( ) to connect the computer and its monitor to the UPS backup outputs
( ).
-
Turn on the UPS.
-
Charge the UPS for 8 hours.
-
The equipment connected to the UPS can be switched on.
Replacing the fuse (Replacing the fuse)
-
Make sure the UPS is completely off, (disconnect mains power).
-
Use a spare fuse of same rating (250V, 5A)!
-
Open the fuse holder ( ).
-
Replace the fuse and close the fuse holder.
