15
Chapter 3
: Operating Your TV
Changing the TV/VCR's Channel Memory
Your TV/VCR's memory determines the channels that are available
using the
▲
CH
▼
buttons. You can add channels to this memory or
remove them from memory. If a channel is removed from memory, you
can tune to it with the number buttons, but you cannot tune to it with
the
▲
CH
▼
buttons.
If there are just one channel memorized, then the Add/Delete Channels
function will search the whole channels. But if there are two or more
channel memorized, then the Add/Delete Channels function will search
the memorized channels only.
Adding/Deleting a channel to memory
1.
Use the number buttons to tune to the channel.
2.
Press the MENU button until “Set-Up
”
menu will be displayed
3.
Use the
▲
CH
▼
buttons to select
“
Add/Delete Channels
”
, then use
the VOL
▶
button to enter the
“
Add/Delete Channels
”
process.
4.
If the channel is not in memory, then use the
◀
VOL
▶
buttons to add
the channel from memory.
5.
If the channel is in memory, then use the
◀
VOL
▶
buttons to delete
the channel from memory.
6.
If you are going to delete other channel, then press the
▲
CH
▼
but-
tons until desired channel is selected. And press the
◀
VOL
▶
buttons
to delete the channel.
7.
Press MENU to exit.
Displaying the TV/VCR’s Status during TV Operation
1.
To quickly see the current channel number and status,
press RECALL button on the remote control.
The current channel number and status will be displayed.
