TruVision 6MP and 12MP 360° Camera Configuration Manual
63
3. Under the
Rule
submenu, click
on the left of the live view image and draw a red
count area.
4. Set the detection line.
Draw a yellow detection line on the live video to detect and count the objects
entering or exiting across the line.
1) Click
to draw a detection line. An orange detection line will appear on the
image.
Note:
The detection line should be drawn directly below the camera and it should
cover the entire entrance/exit region.
Draw the detection line where people do not linger to improve the accuracy
of the count.
The detection line should be drawn within the red count area. Otherwise you
will get a Parameter Error when saving.
2) Click and drag the detection line to adjust its position.
3) Click and drag the two end points of the detection line to adjust its length.
4) Click
to delete the detection line.
5) Click
to change the direction. The yellow arrow indicates the direction of
entering.
6) Click
to reset the counter to zero.
5. Click
Save
to save the settings.
