23
i) Key in the IP address of the Linux Machine Trap server option.
ii) In Network settings page enable SNMP and provide community name, contact, and location
information.
iii) Run this command on Linux PC "snmptrapd -f -Le".
iv) Select the event type which you want to be notified.
v) On that event notice that some messages will get printed on the console where you are
executing the above snmptrapd command.
IP Address Report Page
Network management becomes difficult when TRP-C34H is forced into DHCP. Any IP changes
due to DHCP in TRP-C34H are reported to the assigned Host on the Network.
On IP address Report, click the modify box to activate the parameter, and set the IP address,
Port number and time period to Auto report to host.
Summary of Contents for TRP-C34H
