background image

3

© TrynEx International 2013 (REV A) F51073A

Record important machine information here for quick reference. This information can be found on the Serial Number Plate located on the 
auger motor enclosure; and the Serial Number label on the Controller.
Model ____________________________________________
Spreader Serial #  _____________________________________
Control Serial # 

_____________________________________

Date Purchased  _____________________________________
Dealer where purchased 
___________________________________________________
See separate Warranty Information Sheet for your warranty coverage.

Introduction

Model No. SP-1675

Serial No. X4-100000

Manuf. 2013

Madison Heights, MI 48071     U.S.A.
1-800-725-8377     trynexfactory.com

This manual is intended to help you to get to know your Precision Pro Spreader and how to operate it safely, correctly and economically. If 
you observe these instructions, you will prevent hazards, reduce repair costs and breakdown times, and increase the reliability and service 
life of the machine.

The manual must be read and used by every person who will be working with or on the machine for:

•  Operation (including preparation, repair during operation, & clean-up)
•  Repairs (maintenance, inspection, overhaul), and/or
•  Transport.

All regulations for safety and proper working practice must be observed in addition to this manual and any applicable regulations for the 
prevention of accidents. Should you lose your Owner’s Manual or would like extra copies, they can be purchased from your SnowEx dealer.

THIS SIGN SHOULD ALERT YOU:

This Safety Alert Symbol is used to pinpoint characteristics that, if not carefully followed, can create a safety 
hazard. When you see this symbol in this manual or on the machine itself, be alert! Your personal safety and 
the safety of others is involved.

Defined below are the Safety Alert Messages.

DANGER

Information that, if not carefully followed, can cause death.

WARNING

Information that, if not carefully followed, can cause serious personal injury or death.

CAUTION

Information that, if not carefully followed, can cause minor injury or damage to equipment.

IMPORTANT

This symbol is used to call out information that is important to follow carefully.

IMPORTANT EQUIPMENT INFORMATION

Example

Model # D6527

Serial #     1234

TRYNEX INTERNATIONAL

     1-800-725-8377

Summary of Contents for SnowEx Precision Pro SP-1675













Reviews: