5
© TrynEx International 2013 (REV A) F51073A
Operating Instructions
Loading Spreader/Operating the Controller
LOADING SPREADER
MATERIAL WEIGHTS
MATERIAL
WEIGHT PER CUBIC FT.
Rock Salt
80-90 lbs.
Calcium Chloride Pellets
75-85 lbs.
Do not overload vehicle. Use the chart below to calculate the weight of spreader and material to comply with Vehicle Weight Ratings.
Empty weight of spreaders:
SP-1675
205
lbs.
SP-1975
405
lbs.
Approximate capacity of spreaders:
SP-1675
6 cubic feet
SP-1975
14 cubic feet
Approximate weight of full spreaders:
With Rock Salt
SP-1675
715
lbs.
SP-1975
1595
lbs.
With Calcium Chloride Pellets
SP-1675
685
lbs.
SP-1975
1525
lbs.
Leave the screen in the hopper when loading to prevent large chunks and large objects from entering the hopper and damaging the spreader.
OPERATING THE CONTROLLER
Spinner Speed
Auger Speed
Vibrator
ON
OFF
Power
Turn the Spreader on with the POWER
switch.
Adjust SPINNER and AUGER speeds with
the two knobs. Speed will be displayed
on the screens. Adjust to get your desired
spread width and application rate –
‘Spread Pattern.’
Use the Vibrator to loosen ‘bridged’ mate-
rial and improve flow to the auger with the
VIBRATE switch. The vibrator does not have
to be on continuously.
Turn the spreader off with the POWER
switch when you are done spreading, or
need to pause. The spread pattern will not
change as long as the knobs are left in the
same position.
Summary of Contents for SnowEx Precision Pro SP-1675
Page 11: ...11 TrynEx International 2013 REV A F51073A Notes...
Page 12: ...133009...
