8
© TrynEx International 2013 (REV A) F51073A
Operating Instructions
Adjustable Spinner
When the fins are in their center adjustment position, the spread pat
-
tern will be centered (with most materials).
When looking down at the spinner, moving the fins clockwise will
adjust the spread pattern toward the left side of the spreader.
When looking down at the spinner, moving the fins counter-
clockwise will adjust the spread pattern toward the right side of the
spreader.
Your spreader is equipped with an adjustable spinner to assist you in more precise material application. The spinner plate gives the operator
control of whether the material spreads to the right, left or is centered. Before operating the spreader, spread some material in a clear area
where you can easily observe the spread pattern and how it changes with fin adjustment. Use the instructions below as a guide to get the
spread pattern you desire. The position of the fins may need changed when using different materials or spinner speeds.
Summary of Contents for SnowEx Precision Pro SP-1675
Page 11: ...11 TrynEx International 2013 REV A F51073A Notes...
Page 12: ...133009...