M e r c u r y V i s i o n H e a d s e t C o n t r o l s
7
M E R C U R Y
V I S I O N
Power Button
Refer to reference guide on page 5 of this user manual to
locate the power button. To turn on the
Mercury Vision
,
press the power button for a few seconds until you feel a
slight vibration on the headset indicating that the device is
already on.
You will see the trysight logo (picture 7.1) displayed and will
shortly be replaced by the warning message (see picture
4.1).
Press any button to enter into the live view screen.
Note:
Wear your headset before turning the device on. To
wear the headset, place the device over your eyes and pull
the straps over your head. Adjust the Velcro straps to
achieve the best fit. It is suggested that you keep your
prescription glasses on.
DO NOT WALK OR DRIVE WHILE
WEARING THE DEVICE.
Focus Wheel
Refer to reference guide on page 5 of this user manual to locate
the focus wheel. When the device is already on, use the focus
wheel of your goggles by scrolling it to the left or right to adjust
the focus until you get the clearest picture.
7.1
