n
Replacing the diamond cutting disk
transport safeguard (
12
)!
CAUTION!
Prior to replacing the cutting disk make sure the device is
Transport and store the device in a package protecting from humidity
disconnected from the power supply. Pull the plug from the socket.
and dust. Secure the vents. Small elements penetrating the casing might
damage the motor.
ź
Unscrew the bolts (
23
) on both sides of the motor (fig.
E1
) and
remove the protective screen (
6
) by moving it upwards and to the right
WASTE DISPOSAL AND RECYCLING:
(fig.
E
).
In order to prevent any damage in transport, the device is placed in a
ź
Unscrew the mounting nut (
24
) using a box wrench (
27
), at the same
package. The package is a reusable or recyclable material. The device and
time blocking the spindle with the wrench (
17
) (fig.
E2
).
its fixtures are made from a variety of materials, such as e.g. metal and
CAUTION!
Left-handed thread.
(Unscrew the nut to the right, according
plastics. Damaged components should be delivered to recyclable
to the direction of the cutting disk rotation).
materials collection site. Please ask in a specialized store or local
Remove the external pressure flange (
25
) and the cutting disk (
5
).
government office for details.
CAUTION:
Prior to attaching a new disk, clean the external flange
thoroughly.
NOTE:
Attach new disk by performing the aforementioned steps in reverse.
CAUTION!
Note the proper direction of rotation of the cutting disk (see
arrow indicators (
26
) on the diamond disk and the protective screen).
Mount the screen of the abrasive disk.
CLEANING AND MAINTENANCE:
CAUTION! Prior to commencing cleaning and maintenance make
sure the device is disconnected from the power supply. Pull the plug
from the socket and make sure that the abrasive disk has stopped.
n
Cleaning
It is recommended to clean the device directly after each use.
The device should be cleaned with a moist cloth and a little gray soap. Do
not use any cleaning agents or solvents, as they can damage the plastic
components of the device.
The coolant container (
4
) and coolant pump (
15
) should be cleaned on a
regular basis, otherwise the cooling of the diamond cutting disk might
fail.
n
Maintenance
CAUTION!
Check the condition of hoses and other important parts
on a regular basis, as their failure may lead to a maximum increase
of pressure of the supply water.
There are no components inside the device that require maintenance. All
movable parts should be lubricated on a regular basis.
TRANSPORT AND STORAGE:
Prior to transporting or storing the device empty the cooling water
container. Do not use any safeguarding devices to lift the device.
CAUTION:
When pulling the device from the container and during
transport the cutter head must be locked with the bolt (
11
) and the
P
ROTECTION OF THE ENVIRONMENT:
The symbol nearby denotes that old equipment must
never be thrown away together with other waste (with the
penalty of a fine).
Hazardous components of electronic
equipment may adversely affect the natural environment and
human health.
Each household may contribute to the recovery and reuse (recycling) of
old machinery and equipment. Both in Poland and Europe a system for
recovery of used equipment either exists or is being created. The system
obliges all organizations that sell such equipment to collect the used
machinery and appliances. Moreover, general purpose collecting points
for such equipment are available.
MANUFACTURER:
PROFIX Ltd.,
34
Marywilska Street,
03-228 Warsaw,
POLAND.
TYPICAL DEFECTS:
The cutter fails to turn on.
Check the power supply to the socket.
Check the residual-current device.
- If the cutter still does not work, please contact an authorized service
point.
High motor noise.
The motor or carbon brushes are damaged.
- Contact the authorized service point.
This device is compliant with domestic and European norms, and safety
guidelines.
All repairs must be done by qualified personnel, using original spare
parts.
9
n
Explanation for icons found on the nameplate
«Always wear safety goggles
!
»
«Read user's manual before
you start using your tool!»
«Wear hearing protectors!»
«Wear protective gloves!»
«Caution, cutting risk!»
«The cutter can only be used with cutting
disks with full diamond coating!»
«EC compliant device»
Summary of Contents for TG18601
