DISASSEMBLY FOR THE CHANGING OF BLADES AND
HAMMER PELLETS
It is imperative to remove the ignition key before this type of servicing
.
- The hexagonal socket head screws holding the blades and hammer pellets are factory
mounted using a normal LOCTITE thread-lock adhesive. To disassemble, use a suitable
wrench in good condition.
- Remove all the blades and hammer pellet screws (when reassembling, only use new, well
degreased screws).
- Clean the support surfaces; seats
(1)
and heels
(2)
; blades and hammer pellets.
To access to the blades and pellets, remove the 4 nuts
(4)
and the main body extender
(3)
along with the shaft.
- Check that the hammers can rotate freely around their axle.
M A I N T E N A N C E
Summary of Contents for Saelen GS/COUGAR PTO
