-Remount new or sharpened blades of identical weight.
IMPORTANT
: Sharpening should be carried out by a professional on a machine specially
adapted for that purpose, and not with a grinding machine.
Also ensure that a cutting edge angle of 35° is maintained.
The minimum length
(A)
after sharpening should not be less than
50mm
. (The length of
a new blade is 60 mm).
-Retighten the screws with thread lock at a torque of 16 M. Kg ensuring that the blades
and pellets are resting on their heel.
IMPORTANT: always take care to install new well-degreased screws so that the
thread lock can adhere correctly.
-Reassemble the main body extender
(3)
.
-Start the engine and leave it to rise in temperature for a few minutes.
-Accelerate to mid-speed so that the rotor begins to turn and ensure that no abnormal
vibration is disturbing the good operation of the machine.
M A I N T E N A N C E
Engine shutdown, key contact withdrawn
Trap visit rotor:
Afte r unscre wed its four bolts fastening , this
visit trap permi t to see the wea r on cutting
tools
Still waiting for the complete cessation of the
rotor before unscrew the nuts fixing the door.
Summary of Contents for Saelen GS/COUGAR PTO
