7
3.1. GETTING STARTED
To start operating the product, go through the following steps:
•
Take the product out of the package. Check the product for
mechanical damage or any swelling of the rechargeable battery.
•
Carefully read the instructions.
•
Software is stored into the memory of the Recorder.
•
Check battery charge level. If pressing the Status button, the LED
doesn't flash – the battery level is low. Charge the battery (see. 3.3
Battery Charging).
•
Write configuration to SD-card using supplied software and then
to the recorder by inserting micro-SD card and pressing Record
button. This will set correct current time and date.
3.2. VOICE RECORDER MODES
To view the Recorder's status, use Status button. If you press the Status
button, Status Control LED lights up for a moment. LED color corresponds to
mode the Recorder is in at the moment. By default, Recorder is in Power
Saving Mode.
The list of modes and their corresponding LED colors are specified in the
Table below: