10
Preparing the recorder for work
Before recording, turn on the recorder. For different
models, there are different ways to turn on the
recorder. You can find a full description of how to
turn on the recorder in the recorder instruction’s
supplements.
Making the recordings
After you turn on the recorder, start (turn on)
recording. Methods of starting recording are
different for different models. You can find the
full description in the recorder’s instruction
supplements.
After you start recording, the recorder flashes
5 times and then starts recording. While recording,
the recorder’s LED indicates the recorder’s
operating modes by two successions.
If you turn on recording by a button, recording will
start when you release the button. The indication
happens in the following order: the first flash
succession, a pause for 2...4 seconds, the second
succession, and then a pause for 7... 10 seconds.
The first succession
corresponds to the battery
charge at the moment when recording begins
(for models with the power supply from a battery)
