17
• Recordings’ downloading and uploading
Connecting to a Computer
Connect the recorder to a computer USB port
using the supplied USB cable. While connecting,
the recorder LED will flash. The system will
recognize removable disc. Open it and run
the file “RecManager.exe”. After the programs
loads the recorder will be detected by
the PC and recorder’s contents will be shown
in the program’s window.
Make all the operations you need. Then close
the program and disconnect the recorder from
the computer.
For the full information about the program, read
the Manual to RecManager, which is situated
in the internal memory of the recorder.
Please note!
Don’t turn off the recorder with
RecManager being busy with some operation
(the LED is flashing during this). This may lead
to data damage.
When the recorder id connected to PC,
simultaneous recording is impossible.
If the recorder is in the mode of recording, and