MICROWAVE OVEN
7
CONTROL PANEL
OPERATION CHECK
After unpacking this appliance, examine the now oven for evidence of shipping damage.
This is most important since a damaged oven may allow the escape of microwave energy.
Make sure you remove all packing from the microwave cavity. Check the oven operation
when unpacking the unit and any time the oven is not working properly.
1. Plug the power cord into an earthed electrical socket.
2. Place the glass tray inside the oven cavity.
3. Place a cup of water (at room temperature) inside the oven, on the glass tray.
4. Close the door securely.
5. Set the TIMER for 3 to 4 minutes (note: microwave activity starts).
6. When the cooking time has elapsed, the signal will sound (note: all microwave activity
stops).
7. If the oven is operating normally, the water will be hot.