baws002-gbr-0
TSCHAN
®
-S SD-5
- 7 -
Size
SD-5
d
1
max
[mm]
d2
max
[mm]
D
1
[mm]
D
2
[mm]
D
3
[mm]
L
[mm]
L
1
[mm]
l
1
[mm]
l
2
[mm]
S
[mm]
S
1
[mm]
z x M x Ls
m
unbored
[kg]
100
42
45
105 65
65
137,5 39,0 37,5 49,0 3,0 7,0
9 x M 8 x 20
4,7
125
55
53 / 55
126
75
75 / 80
157,5
45,0
44,0
56,0
3,5
7,0
9 x M10 x 25
7,9 / 8,1
145
65
60 / 65
145
85
85 / 92
174,5
53,0
47,5
60,5
4,0
7,0
9 x M12 x 30
11,2 / 11,9
170
85
75
170 110
110
203,5 54,0 60,5 74,5 5,0 7,0
12 x M12 x 30
18,9
200
95
95
200 135
135
259,5 62,0 79,5 98,5 6,0 8,5
12 x M14 x 30
33,0
230
105
110
230 160
160
285,5 65,5 88,5
110,0 7,0
10,0
15 x M14 x 35
47,9
260
125
125
260 180
180
303,0 78,0 88,5
112,5 7,0
11,5
15 x M16 x 40
67,1
300
140
140
300 200
200
353,0 90,0 107,5
131,5 7,0
11,5
15 x M20 x 50
100,0
360
150
160
360 225
225
443,0 99,0 140,0
172,0 8,0
11,5
12 x M24 x 55
162,6
400
160
160
400 225
225
434,5 99,0 137,0
172,0 7,5
11,5
14 x M24 x 55
178,6
The torques T
Knom
and T
Kmax
. are valid for:
-
Ambient temperatures of –30°C up to +30°C for Polyurethane (Vk),
-
Ambient temperatures of -30°C up to + 60°C for Perbunan (Pb)
-
Operation within the range of the specified alignment values.
For determining the size of the coupling according to DIN 740, part 2, (or to catalogue
TSCHAN
®
-S) various factors have to be taken into account:
-
the temperature factor S
υ
in case of higher temperatures,
-
the start-up factor Sz depending on the frequency of starts,
-
the shock factor S
A
, S
L
depending on the service conditions.
For circumferential speeds above 22 m/s, referred to the nominal size of the coupling, we
recommend balancing the steel parts of the coupling.
