Operation
3-25
Communication Screen
Use the Communication screen to configure the IP address, subnet, and
default gateway to which the instrument belongs. Addresses can be
entered using the arrows or by selecting a field and using the on-screen
keypad.
Field
Description
IP Address
The numerical identification (logical address) that is
assigned to this device when participating in a
computer network utilizing the Internet Protocol for
communication between its nodes.
Subnet Mask
A network of computers and devices that have a
common, designated IP address routing prefix. All
hosts within a subnet can be reached in one "hop" (time
to live = 1), implying that all hosts in a subnet are
connected to the same link.
Default Gateway
A node on the computer network that serves as an
access point to another network and is chosen when
the IP address does not belong to any other entities in
the Routing Table.
Use DHCP
(Dynamic Host
Configuration
Protocol)
When checked, this protocol is used to automatically
obtain the information necessary for operation from a
DHCP server running on your local network.
N o t e
TCP/IP is an industry standard networking protocol that allows
computers and devices to communicate over Ethernet and other media
access channels. Providing full details on how to configure an IP
network is beyond the scope of this manual. Please contact your
company IT department or a qualified networking professional if you
are not qualified to configure such a network.
Summary of Contents for AEROTRAK 9306
