background image

 

QUICK START GUIDE 

AEROTRAK

®

 HANDHELD 

AIRBORNE PARTICLE COUNTER 

MODEL 9303 

 
 

Thank you for purchasing a TSI AeroTrak

®

 

Model 9303 

Handheld Airborne Particle Counter (particle counter). 
This guide will help you quickly begin using your particle 
counter.  
 
More detailed information is in the manual 

located on 

the included TrakPro

™ Lite Secure Software CD.

 

Please refer to the Operation Manual if you have 
questions on the operation of your new particle counter. 

Safety 

This section gives instructions to promote safe and 
proper handling of the AeroTrak

®

 Handheld Airborne 

Particle Counters.  

 

I M P O R T A N T

 

There are no user-serviceable parts inside the 
instrument. Refer all repair and maintenance to a 
qualified factory-authorized technician. All 
maintenance and repair information in this manual is 
included for use by a qualified factory-authorized 
technician. 

 

L A S E R   S A F E T Y

 

The Model 9303 Handheld Airborne Particle Counter 
is a Class I laser-based instrument. During normal 
operation, you will not be exposed to laser radiation. 
However, precaution should be taken to avoid 
exposure to hazardous radiation in the form of 
intense, focused, visible light. Exposure to this light 
may cause blindness. 

DO NOT

 remove any parts 

from the particle counter unless you are specifically 
told to do so in this manual. 

DO NOT

 remove the 

housing or covers. There are no user-serviceable 
components inside the housing. 

 

 

The use of controls, adjustments, or 
procedures other than those specified 
in this manual may result in exposure 
to hazardous optical radiation. 

 

W A R N I N G

 

The battery supplied by TSI (700019) has built in 
protection against explosion and fire hazard. 

Do not

 

use a substitute. 

Do not

 use non-rechargeable 

batteries in this instrument. Fire, explosions, or other 
hazards may result. 

Labels 

Advisory labels and identification labels are attached to 
the outside of the particle counter housing and to the 
optics housing on the inside of the instrument.  
 

1

.  Serial number label 

(back panel) 

 

2

.  Laser radiation label 

(internal) 

 

DANGER! 

INVISIBLE LASER RADIATION 

WHEN 

OPEN. AVOID DIRECT 

EXPOSURE TO BEAM 

WARNING: NO USER SERVICABLE 

PARTS INSIDE. REFER SERVICING 

TO QUALIFIED PERSONNEL

 

3

.  Laser radiation 

symbol label 
(internal)

 

 

3

.  European symbol 

for non-disposable 
item. Item must be 
recycled. 

 

Unpacking 

1.  Carefully unpack the particle counter

 

from the 

shipping container and verify that all the items listed 
in the following table are present.  

2.  Contact TSI immediately if items are missing or 

broken.  

 

Summary of Contents for Aerotrak 9303

Page 1: ... visible light Exposure to this light may cause blindness DO NOT remove any parts from the particle counter unless you are specifically told to do so in this manual DO NOT remove the housing or covers There are no user serviceable components inside the housing The use of controls adjustments or procedures other than those specified in this manual may result in exposure to hazardous optical radiati...

Page 2: ... ordered accessories or spare parts Power 1 The battery is shipped separately and has to be installed before use 2 Remove the battery cover on the back side of the handle with a screwdriver and connect the battery to the socket Replace the battery cover Do not over tighten the screw 3 Fully charge the battery before use 4 Select the appropriate country specific power plug for the AC power adapter ...

Page 3: ... the Left and Right Soft Keys under and to cycle between values 2 If the setting has more than a few possible values then the Left and Right Soft Keys are not available Instead select Enter to display a screen where the value can be edited with the Up Down keys as well as the Left and Right Soft Keys Use ESC to save the new value and return to the previous menu Set up Time Date 1 Select MENU to go...

Page 4: ...te Secure Data Transfer utility and user manuals come on a CD that was packaged with your particle counter 2 To install the communications software and drivers insert the CD into your computer drive and follow the on screen instructions 3 See the TrakPro Lite Secure Software User s Guide P N 6004404 on CD P N 7001901 for installation instructions N O T E Make sure the particle counter is connected...

Reviews: