buyTSI.com - 800.223.4540
1.
READ THIS MANUAL BEFORE OPERATING
2.
SAFETY GLASSES ARE REQUIRED
3.
Do not wear loose clothing.
4.
Use with caution to avoice possible pinch points while operating
5.
Before each use visually inspect the for loose bolts, and damaged or improperly assembled
accessory equipment.
6.
Use in a clean area to avoid slipping and have enough room to operate safely.
Safety Requirements
Installation Requirements
Set-Up Instruction
General Description
• Remove machine from packaging materials.
• Prepare a clean, level surface with adequate room to maneuver tires around the unit.
•
Fasten the CH-23 Stand to a solid surface. Use 3/8” hardware to bolt to a cement floor. (If using
the optional Floor Plate, secure it firmly to floor using 3/8” hardware and bolt the units together.)
• Insert the leverage bar, if necessary adjust shoe height for the tire size.
No power or air requirements, but unit should be bolted to a solid, clean, level surface.
TSI has developed a Floor Stand (sold separately)for this purpose.
The CH-23 Stand w/Bead Breaker is primarily used in conjunction with mounting the CH-22
Small Tire Changer (sold separately) on it.
As a Bead Breaker it’s fully adjustable to accept many ranges of tire sizes and using it is quick,
easy and effortless.
