buyTSI.com - 800.223.4540
Operational Instructions
Use
Deflate the tire.
Place the inside edge of tire on wheel locator.
Position bead breaking shoe in bead area and
adjust the pivoting tube to an appropriate
height with pin (see A). It should be situated
above the tire to apply a reasonable amount
of pressure with the leverage bar in order for
the shoe to displace the bead from the rim
(see B).
It may be necessary to rotate the tire around
the Wheel Locator (see C) and repeat
operation until the entire bead is loose from
the rim.
Flip tire over and repeat.
Adjust
For wider tires simply adjust pin (see A) and
proceed. There are four heights to choices.
Make sure the area around shoe is free from
hands or fingers before prying down on
leverage bar.
Store the leverage bar on tool holder when
not in use.
Maintenance
If pivot tube becomes loose tighten the bolt
holding it in place.
Lightly lubricate with oil or grease.
Make sure the CH-23 remains bolted down
firmly while in use.
Fig. 2
Fig. 2
A
A
B
B
C
C
Leverage
Leverage
Bar
Bar
