OPERATOR’S MANUAL
ISO
6
Version 4 UL 2_3 Manual
COMPONENT INSTALLATION / 7
6011258 Rev C
WORKING SET MEMBER (WSMB) MODULE
The WSMB module can be attached to the implement by:
1. Bolting to the implement.
2. Using tie straps to secure to implement.
IMPORTANT
For applications using multiple modules, it is
recommended that the WSMB’s are mounted on the
implement by increasing serial number order from
left to right.
Figure 6
WSMB
WSMB INSTALL CONSIDERATIONS
1. Select an area on the implement to mount the member that
allows for easy hookup and access. Extensions may be
used to reach members installed on remote areas of
the implement.
2. The module can be mounted in the same orientations as the
ISO
6
module as illustrated in (Figure 5).
3. Mount with the label side of the module facing out.
CAUTION
Do not install the module in any orientation other than
illustrated in (Figure 5). The connection wires must not be
mounted upward as moisture can collect inside the unit
and damage the circuits. Ensure that module connectors
do not face upward when implement is in a folded
position as well.
