OPERATOR’S MANUAL
116 /
GEOMETRY
ISO
6
Version 4 UL 2_3 Manual
6011258 Rev C
DOUBLE PIVOT HITCH TYPE
1. Enter the distance from the tractor hitch to cart axle center.
2. Enter the distance from the first cart axle center (directly
behind tractor) to the second cart hitch.
3. Enter the distance from the second cart hitch to the
implement axle center.
4. Enter the distance (Y value) from implement center to
channel center left and right. If implement bar is offset from
0, enter the size of the offset. This value is typically 0.
NOTE
Double Pivot type are typically used with tow between air
carts.
Figure 82
Double Pivot Implement Type
5. Press the Arrow button to display the Channel Preview
screen. A channel’s position identifies the distance
between the implement GPS coordinates and where
seed is dispersed.
-
The dashed line represents the X coordinate entered on
the hitch selection screen.
6. The initial Channel Geometry screen displays multiple
channel positions stacked behind one another.
7.
Enter the ‘
X
’ coordinate in inches (centimeters) for the
first channel.
8.
Press the Down Arrow button to enter the next channel’s
coordinates. As each cha
nnel’s position ‘X’ coordinate is
entered it displays in the new assigned position.
9. Press the
DONE
button when finished.
