OPERATOR’S MANUAL
154 / CUSTOMIZING THE WORK SCREEN
ISO
6
Version 4 UL 2_3 Manual
6011258 Rev C
Figure 114
Control Instrument Setup
MATERIALS INSTRUMENT
This instrument displays accumulating material totals for
distance and seed counts by field. The specific field totals that
displays as an Instrument data item is set at the Totals screen.
Total Seeds Applied
This instrument counts pulses for all seed sensors set to
population. Also displays total number of seeds planted.
Channel 1- 8 Seeds
This instrument displays the area covered by control channels
1-8. Material distributed accumulates when the master switch is
ON and the ground speed is above the shutoff speed. Current
material distributed is retained after power down.
Channel Scan
This instrument cycles through active control channels every few
seconds displaying material counts.
Material Type
This instrument displays total material distributed by material
type that encompasses all channels with the same material type,
the product class must be defined at the Material Setup screen.
When the product class is defined, this choice appears on the
Material Instrument screen.
