OPERATOR’S MANUAL
ISO
6
Version 4 UL 2_3 Manual
USER LEVELS / 21
6011258 Rev C
Figure 16
Locking to User Level 1
USER LEVEL 2 (DEALER)
User Level 2 provides open access to all setup/configuration
screens excluding Factory Reset and the Alarm Log. To change
from operator level to dealer level, a 6-digit password is required.
Password includes the five-digit serial number found on the label
of the ISO
6
or on the Version screen.
TO UNLOCK TO DEALER ACCESS:
1. At the Version screen:
-
Record the serial number of the ISO
6
module.
-
Press the
PASSWORD
button.
2. On the Password screen, enter the 6-digit password as
follows:
-
Enter the first digit as 2.
-
For the next five digits, enter the last five digits of the
serial number taken from the ISO
6
module found on the
label or
-
the last five digits found at the Version Information
screen (example S/N 1632
10044
- use 10044).
3. Press the Checkmark button to accept password. At the
Password screen, text at screen bottom
states “Dealer
screens on” in the User Level 2 (Dealer) mode.
