OPERATOR’S MANUAL
ISO
6
Version 4 UL 2_3 Manual
OPERATIONS / 103
6011258 Rev C
OPERATIONS
The Operations screen groups together a series of channels with
the same type and product class that have no overlapping rows.
A maximum of 6 operations are possible.
The system automatically assigns similar channels to an
operation but these assignments can be changed to user-
specific requirements. Only channels with rows that can be
controlled by the Task Controller will be added to operations.
Channels with rows that can be controlled by the task controller
must have an operation, and cannot be removed from operations
completely.
TO EDIT AN OPERATION:
1. Press the
OPERATIONS
button.
-
The Operations screens displays the operation groups
and the channel assigned to each group.
2. Highlight an operation and press the
EDIT
button.
3. Press the Name input box to change the operation name,
if desired.
4. Press the Channels input box to change a channel.
5. Press the
ADD
button to create a new operation.
6. Press the
REMOVE
button to split an operation. All channels
on the operation to be removed will be given their own new
operation if possible.
7. Press the
AUTO CONFIG
button to reset all Operations to
the default groupings and remove any added operations.
Figure 69
Enter an Operation
