background image

TSI Incorporated

 

– Visit our website 

www.tsi.com

 for more information. 

USA 

Tel: 

+1 800 874 2811 

UK 

Tel: 

+44 149 4 459200 

France 

Tel: 

+33 1 41 19 21 99 

Germany 

Tel: 

+49 241 523030

 

India 

Tel: 

+91 80 67877200 

China 

Tel: 

+86 10 8219 7688 

Singapore 

Tel: 

+65 6595 6388

 

P/N 6007817 Rev D 

©2017 TSI Incorporated 

Printed in U.S.A. 

9.

LED on the modem will blink while the modem
searches for a network. If the LED stops blinking
and is solid blue, a network has been found and
proper communication with Environet should be
possible. If the LED changes to solid yellow, the
modem has not found a network. A power cycle
may resolve the issue.

10. To utilize the telemetry functionality of Thiamis

1000, please refer to Netronix Environet Quick
Start guide. This guide is included in the
801901 kit.

Summary of Contents for DustTrak 8535

Page 1: ...closure Model 8535 Unpacking Netronix Thiamis GSM GPS Communication Modem 801901 1 Unpack the Netronix Thiamis GSM GPS Communication Modem 801901 for the Environmental Enclosure 8535 and verify that all the items listed in the following table are present 2 Contact TSI immediately if items are missing or broken Qty Item Description Reference Picture 1 Adapter Plate 4 4 40 x 5 16 LG Pan Head Screws ...

Page 2: ...ot needed for this assembly It is only needed when the modem is installed inside a metal enclosure The modem s built in antenna will be able to acquire the cellular signal through the 8535 Environmental Enclosure Installing the Netronix Thiamis 1000 GSM GPS Communication Modem 1 Using the screw driver fasten the adapter plate to the base bracket using the 4 40 x 5 16 pan head screws qty 4 2 Remove...

Page 3: ...e DustTrak monitor and the black Phoenix connector to the modem The third connector is for the heated inlet control module If the heated inlet is not present it can left unplugged 7 Connect the other end to the power cable to the power source Same connection will be made if using the solar power system accessory instead of the 12V DC power adapter 8 Plug the AC DC power supply into an AC power sou...

Page 4: ...rporated Printed in U S A 9 LED on the modem will blink while the modem searches for a network If the LED stops blinking and is solid blue a network has been found and proper communication with Environet should be possible If the LED changes to solid yellow the modem has not found a network A power cycle may resolve the issue 10 To utilize the telemetry functionality of Thiamis 1000 please refer t...

Reviews: