A. Firstly, use a small driller
tip to locate.
4. Drilling
2. Select drilling position for sensor A & D
3. Select drilling position for sensor B & C
5. Sensor Installation
6. Others
7. Sensor Detecting
Locate
the
control box in
the boot, keep
safe, cool, dry
and away from
shake
and
interference.
1.5m
B. Drill with the original driller.
A. Insert the sensors
into the holes one by
one and tighten them.
The sensor with metal
slice must be installed
following the direction.
A
D
A
B
D
A
Sensor
A. Choose suitable drilling position
for A & D sensor with relevant
mark.
B. To perform the best detecting
angle, select the position for A
& D sensor with 8-13cm away from
the side, 11cm is recommended,
and 20
°
with the side.
A. Measure the distance between
sensor A and D, get the result "L".
B. Mark sensor B & C for every 1/3
"L" interval.
B. Hide the
wires in good
order according
to various cars.
1.0m
If the display is installed on the dashboard,
please choose
If the display is installed on the roof,
please choose
