Back to Contents Page
Using the Drive: TSST SH-216CB DVD+/-RW
Drive User's Guide
Front Panel
|
Drive Operation
|
Emergency Eject
|
Cleaning Media
|
Cleaning the Drive
Front Panel
1.
Emergency Eject Hole
If the disc tray does not open when you press the eject button, power off the
computer, insert a pin or unfolded paper clip in the hole and push firmly. Refer to
Emergency Eject instructions below.
2.
Indicator Light
The light blinks when there is drive activity.
3.
Disc Tray
The disc tray opens automatically when you press the eject button. When you
place a disc in the tray, ensure that the label on the disc is facing outwards. If you
are not loading or unloading a disc, the tray should remain closed.
4.
Eject Button
Press this button to open/close the disc tray. This button works only when power is
supplied to the drive.
The position of these features may depend on the specific drive.
Drive Operation:
Inserting a Disc
Press the eject button. The disc tray will be ejected.
Place the disc in the center of the tray with the label side facing up.
Push the eject button to close the tray.
Using the HH Drive Installed Vertically
To insert a disc in a drive that is mounted vertically, perform the following steps:
1.
Locate disc holders (4 locations) on the disc tray.
2.
Position the disc behind disc holders.
3.
Close the drive by gently pushing in the tray or pressing the eject button.
