User Manual B410PT
14
15
3.5 Changing fans
Before you perform this procedure, read the safety instructions of this manuel
Figure 25 Change to the new fan
Figure 24, Remove the fan from the blade
Remove the blade from the chassis (see section
3.1) then, remove the front and rear top covers
(see section 3.2)
1
Unplug the 8pin power cable form the mother-
board
2
Lift up the fan form the fan plastic housing
4
Replace the new fan into the fan plastic housing
and connect the 8pin power cable to the mother-
board
5
Locate the Two system fan as shown
3