User Manual B410PT
22
23
1
From the rear of the blade chassis, untighten
the #6-32 flat head screws as shown
#6-32 FH screws (09-1002-01A)
2
Slide out the L-shape rack mounting bracket
3
If you rack has unthreaded square holes, install
the M5 Cage Nut (09-1053-01A) to the rack
4
Install the L-shape bracket with M5 mounting
screw
(09-1052-01A) as shown
M5 x 3/4” Pan Head Screws,
(order#09-1052-01A)
5
With one person on each side of the sys-
tem, lift the system so that the L-shape rack
mounting bracket aligh with the chassis
6
Push the chassis into the rack, secure the
chassis by tighten the front mounting screws
4.2.2 Install the chassis in a Rack
Figure 37 Removing the L-shape rack mounting bracket
Figure 38 Install the L-shape rack mounting bracket
Figure 39 Install the chassis into the rack