TSUBAKI E&M CO.
- 3 -
Typical Installations
Lubrication and Maintenance* for MZEU12 to MZEU80
MZEU12 to MZEU80 are pre-greased and require no lubrication to Cam area.
Add small amount of grease from the grease nipple on the option parts every 3 months to keep the correct function for bearings.
Brand
23
℉
to 104
℉
(-5
℃
to 40
℃
)
-40
℉
to 104
℉
(-40
℃
to 40
℃
)
Shell
Alvania Grease S1, Sunlight Grease 1, Aeroshell No.7, Aeroshell No.22
Alvania Grease RA
Fiske Bros.
Lubriplate Low-Temp, Aero Lubriplate
Kyodo Yushi
Multemp PS N0.1
Multemp PS No.1
Petro-Canada
PRECISION Synthetic
Exxson Mobil
----------
Beacon 325
Note: Do not use grease that contains EP additives. E1 to E7 options are supplied with bolts for installation and the grease nipple.
Lack of prescribed maintenance and lubrication will shorten the Service life of Cam Clutch and may cause unnecessary mechanical damage.
*
Actual maintenance may vary depending on usage and operating conditions.