4 5 6
Caution:
Recommended angle parameters can be
found in the appendix table.
Step 5. Extend the end cable (optional)
Extension cable (TSOL-MC200-G2, 2m) can be
used to extend the end cable.
Dismantle the end cable.
Connect the two sides of extension cable to the
microinverter and the end cable.
Step 6. Install more Easy Solar Kit (optional)
More Easy Solar Kits can be connected together
to form a whole system.
Take out the end cable of the second Easy Solar
Kit. Connect the two sides of Extension Cable to
the first and second microinverter.
Base fasteners can be used to connect two base
plates together.
Step 7. Fix the base plate
Put weights (Brick, Stone etc.) on the base plate to
promote the wind loading rating of Easy Solar Kit.
Warning:
Weights (Brick, Stone etc.) should be
more than 20kg.
Or use base fasteners and nails to fix the base
plate to the ground.
Step 8. Start the system
Insert the plug to the socket and the system will
start producing power after about a two-minute
waiting time.
TSUNESS Co., Ltd
TEL: +86 512 6618 6028
E-mail: sales@tsun-ess.com | www.tsun-ess.com
Add: No. 555, Chuangye Road, Jiashan County, Zhejiang
Province, China
