SPEAKER CONNECTIONS
SE-408N
POWERED MIXING AMPLFIFIER - 4 -
BEFORE CONNECTION
Connect all inputs and outputs before turning power on. This device is capable of very high audio output levels. Making
connections with power up can cause loudspeaker damage.
This is a full stereo system, be sure left and right inputs on stereo inputs are connected accordingly for proper stereo
reproduction and accurate panning of signal.
Be certain that all connectors are clean and firmly connected. Loose or dirty connections generate excessive noise and
distortion and may generate popping noise that can damage loudspeakers.
<HOW TO CONNECT SPEAKER WIRING>
Strip each wire back evenly, about 3/8-inch for connection. The amount of exposed
wire must be minimal because significant power levels are present.
Each channel will accept one 4-
ohm speaker or two 8-ohm
speakers.
Additional speakers could cause
thermal protective shut down of
the amplifiers.