FRONT PANEL CONTROLS
SE-408N
POWERED MIXING AMPLFIFIER - 5 -
<MIC CHANNELS> CH1~CH6
1. HIGH: Shelving type tone control adjusts channel frequencies above 10KHz ±15dB.
2. MID: Peaking type tone control adjusts channel frequencies centered around 1KHz ±15dB.
3. LOW: Shelving type tone control adjusts channel frequencies below 60KHz ±15dB.
4. EFF: Sends channel signal to on-board digital reverb effect and external effects patch for use of
external effect device.
5. MON: Monitor volume control for mixing monitor output to patch panel for feed to external
monitor amplifier.
6. PAN: This control positions the channel signal from left to right for stereo imaging.
7. VOL: Channel volume control mix to master.
8. PEAK LED: Illuminates with excessive input signal level. Excessive signal results in significant
audible distortion.
9. GAIN ATTENUATION SWITCH(-20dB): "In", when peak LED flashes, reduces input level
which reduces the distortion that results from excessive input level.
10. MIC INPUT JACK: 1/4" unbalanced
11. XLR BALANCED LO-Z MIC INPUT JACK (Pin-1,
gnd; Pin-2, high; Pin-3, low)
<STEREO CHANNELS> CH7/8~CH9/10
12. HIGH: Shelving type tone control adjusts channel
frequencies above 10KHz +15dB.
13. MID: Peaking type tone control adjusts channel
frequencies centered at 1KHz +15dB.
14. LOW: Shelving type tone control adjusts channel
frequencies below 60KHz +15dB.
15. MON: Monitor mix level adjustments to adjust
volume of individual input to monitor master output.
16. BAL: Balancing left & right volume control of stereo
channel.
17. VOL: Channel volume control mix to master.
18. PEAK LED: Illuminates with excessive input signal
level. Excessive signal results in significant audible
distortion.
19. SSS (Spectral Surround Sound): When selected this
switch routes stereo signals through a proprietary
digital spectral surround sound processor for
enhanced surround stereo presence. This is not part
of the effects processor system.
20. 1/4" STEREO INPUT JACK: -10dB (300mV)music
source.
21. RCA-TYPE STEREO INPUT JACK : Stereo input jack for music source of -
20dB.
<ECHO CHANNELS>
22. DLY: Echo time delay control.
23. RPT: Repeat echo control.
24. HIGH: High tone control of effect.
25. LOW: Low tone control of effect.
26. MON: Effect to monitor mix volume control.
27. VOL: Channel volume control of effects mix to master.
28. SELECTOR: Selects between stereo or mono.
29. EFF/RTN: External echo return volume control. This controls effects return
volume when external device is used.