ELECTRICAL WIRING
Connecting the cabtyre cable
Before connecting leads to the terminals, make certain the power supply is
turned off (circuit breaker, etc.), to avoid electrical shock, shorting, or
unexpected staring of the pump, leading to injury.
Do not use the pump if the cabtyre cable is worn or damaged, which can
result in electric shock, shorting, or fire.
Connect the leads of cabtyre cable to the control panel terminals as shown in the diagram, being
careful not to let the leads become twisted together
.
Star-delta start
Electrical circuit diagrams
Star-delta start
MAINTENANCE AND INSPECTION
Oil inspection and Oil change
When the pump is tilted for inspecting or changing the
oil, pay careful attention to the center of gravity and
weight of the pump.
Inspecting Oil
Remove the oil plug and tilt the pump to drain a small amount of oil.
If the oil is milky white or has water mixed in with it, the mechanical
seal may be faulty. In this case the pump will need to disassembled
and repaired.
Replacing Oil
Remove the oil plug and drain all the oil, then replace it with the specified amount.
Note:
Worn oil and other waste products should be disposed of by qualified agent, in accord with applicable local
laws. The oil plug packing and O-ring should be replaced each time the oil is inspected or changed.
Model Oil
Quantity
LH12185 8,000ml
WARNING
CAUTION
WARNING
