Beijing TT Aviation Technology Co., Ltd.
Add: No.1 TTA Building, Niantou Industrial Park ,Changping District,Beijing, China
www.ttaviation.com
34
5.7 Flight Control
1) Pull control sticks to the bottom inside corners to unlock drone.
Meanwhile,Keep away
from the drone to avoid any injuries.
2) Pull control sticks to the bottom outside corners to lock drone(
only for emergency
use
.While flying, this operation can also stop motors immediately).
3) After unlocked, push the throttle above the neutral position to make the aircraft take
off.
4) After unlocked, motor will be stopped and locked automatically if user do not push the
throttle above the 10% position from neutral in 3 seconds.
5) After landing the aircraft, push the throttle down and hold for 3 seconds. The motors
will be stopped.
Cautions:
1. It is suggested to take off in
GPS mode
if satellites is more than 14, no magnetic field
interference and all parts of aircraft are in good condition
.
2. Before take off, please check the
stick mode
and confirm the current settings is the
mode you want. If not, never reset by yourself without the introduction of TTA after-sales
engineer.
3. During autonomous mode or AB mode, missions can be
interrupted
by switching the
flight mode manually. After that, operator can
fully control
the aircraft.
4. When drone executes protection action such as low-voltage protection and low-liquid
protection, operator can
take over control
by switching the flight mode manually if
needed.
Lock
Unlock
