AB Connectors Limited
Specification No. 528
ABCIRP Connector Series
Assembly and wiring Instructions
AB Connectors Limited Issue 9: July 2010
Page 25 of 41
8.6.8 Assemble the connector backshell and accessory to the cable in the following order.
.
• SCHSA backshell. Ensure the ‘O’ ring seals are seated correctly.
.
• CRA accessory braid sock assembly.
.
• CRA accessory locking nut/conduit adaptor.
.
Installation of CRA and SCHSA Accessories
Section showing O’ring and Braided Sock Position.
8.6.9
Secure Knitmesh as detailed in method A.
Pre-Knitmesh Assembly
8.6.10 The later stages of the assembly are as per that detailed in Method A.