AB Connectors Limited
Specification No. 528
ABCIRP Connector Series
Assembly and wiring Instructions
AB Connectors Limited Issue 9: July 2010
Page 32 of 41
Grommet extraction
tool
P80 16 GET
To allow extraction of
contact back through
the grommet without
damaging sealing
feature.
Supplementary tooling
Photo
Description
Part number
Use
Contact retention
tester
HT250-3
Applies a load to the
front of the contact to
ensure it is seated
correctly.
Contact pin retention
test probe
68 016 01 (size 16)
68 012-01 (Size 12)
Fits onto contact
retention test probe to
test socket contacts
Contact socket
retention test probe
67 016 01 (Size 16)
67 012 01 (Size 12)
Fits onto contact
retention test probe to
test socket contacts
Pin Contact alignment
gauge
P80 ## CAG (Where
## = size and
planform e.g. P80
2821 CAG)
To check that
contacts have not
bent during assembly,
tool also straightens
bent pins