Tiny Audio C3
--Select FM Transmitting Frequency (Manual Mode):
1.
Press “TX/SCAN” button to enter FM transmitting frequency selection
mode,
2.
Then use Tuning Knob to select your favorite vacant frequency (based on
your past experience with the known vacant frequency) which you would
like to receive by your car radio.
3.
Once it is selected, press “TX/SCAN” button to confirm and exit or the
screen will go back to DAB+ mode automatically after 3 seconds and the
selected frequency will be shown at the top of the blue bar, e.g.
TX108.0MHz.
Remarks:
“Vacant frequency” means there is no any radio broadcasting content or noise
when the frequency is selected.
Search and select DAB+ channels:
1.
Press the “MODE” button until “DAB+ Radio” mode is found
2.
Use Tuning Knob to select the desired DAB+ channel
3.
Or press “MENU” button to enter Preview Mode, use Tuning Knob to scroll
up or down to select the desired DAB+ channel and press “MENU” button
again to select.
4.
You may also press and hold the “TX/SCAN” button for 3 seconds
to
re-activate the “Auto Scan” process if you need to update the DAB+ radio
channels.
Remark:
For normal use, you don’t have to perform the “Auto Scan” every time
you use the car DAB+ radio unless there are newly added DAB+ channels, then you
7
