Beijing TT Aviation Technology Co., Ltd.
Add: No.1 TTA Building, Niantou Industrial Park ,Changping District,Beijing, China
www.ttaviation.com
32
Finish
function has two meanings:
①
In the process of obstacle mapping and calibration point mapping, Finish means that
the current object mapping is over.
②
In the block mapping process, Finish means the entire block is mapped completed,
the name needs to be noted and then uploaded to the cloud.
Caution:
The shape of the block and the obstacle must be normal polygons, and no
self-intersection is allowed.
User can click the calibration point to enter the accurate latitude and longitude coordinates
as the picture above, when using a precise positioning tool,such as RTK .
5.33 Measure Track
1) The measure track is used to work in the situation where the
Measure Block
mode
cannot be sprayed normally, such as orchard, tea gardens, etc. In these places, the
distribution of crops is scattered, so the whole plot is not evenly sprayed. The
Measure Track mode is the planning the track artificially ,and make the drone spray
along the specified track.
2) In Measure Track mode, the GCS will also attempt to connect the spotting device.
3) The Measure Track mode does not require mapping obstacles. The left icon (in the
red box) only support track mapping and calibration point mapping.
4) The three button functions on the right is the same with the Measure Block mode.
After mapping completed, click the Finish icon to finish mapping, name it and upload
to the cloud.