Beijing TT Aviation Technology Co., Ltd.
Add: No.1 TTA Building, Niantou Industrial Park ,Changping District,Beijing, China
www.ttaviation.com
46
6.2 Compass Calibration
1) Place drone on a horizontal plane.
2) Push E lever of RC from top to bottom rapidly for 5 times to enter into compass
calibration mode. Or Click “Mag.Calib” icon in Calibration section of GCS to enter
into compass calibration.
3) when green LED of drone is on, hold and keep drone rotating clockwise slowly.
When LED turns to blue, hold and place the drone vertically and keep the head down
to the ground, rotate copter clockwise slowly till LED flashes,calibration succeeded. If
LED turns to red, calibration failed. User need to calibrate again.
Drone need to be calibrated,when
●
GPS or flight controller was moved to other positions
。
●
Electronic wiring of drone is changed.
●
The distance between the last calibration place is over 30-50KM.
●
Drone can not fly in a straight line,or it circles a fixed point.
Caution:
(1) Compass should be calibrated after changing flying area.
(2) Calibration should be done in outdoor, far away from high tension line
tower which is easy influenced by magnetic interference.
Rotate Horizontally
Rotate Vertically