PD-20001-R1
Stagetracker II User Manual
10
4.6
Stagetracker II™ Tag
Figure 9
Stagetracker II™ Tag, TTA logo
Figure 10
Stagetracker II™ Tag
identification/MAC address
The Stagetracker II™ Tag is to be used with the TTA
logo facing upwards. For identification of the device, the four last digits
of the mac address found on the opposite side of the TTA logo is used. For example, when assigning Tags to a Tracking
Object the identification number of available Tags appears in the dropdown menu for selection.
The Stagetr
acker II™ Tag is equipped with a mini
-USB B female connector for charging of the device.
Use a mini USB-B Male > USB-
A Male cable to connect the Stagetracker II™ Tag to a charger that meets the USB battery
charging specification BC1.2.
Figure 11
Stagetracker II™ Tag charging
The LED next to the USB socket will begin to flash red when charging. If the device is fully discharged it can take a while
before the LED begins to flash.
When the Tag is fully charged LED turns solid green.
When the Tag is connected to a running Stagetracker II™ Core unit
,
and the Tags are turned on from the Stagetracker II™
Controller software, the LED is rapidly flashing green.
4.7
Tag charger
TTA supplies third party USB battery chargers, currently two different models are available:
Model 1 - 13 x USB 3.0 Type-A inte 1 USB fast-charge port, 5V/2.4A
Model 2 - 7 x USB 3.0 Type-A inte 3 USB fast-charge ports, 5V/2.4A