PD-20001-R1
Stagetracker II User Manual
15
5.3.5
Tags
The Tags tab is intended for initial configuration of the Stagetracker II™ systems inventory of Stagetracker II™ Tags. The
User enters all MAC addresses for every Stagetracker II™ Tag to be used with the Stagetracker II™ system, to allow
coordination of internal components and
for the Stagetracker II™ Tags to
be available to the User to assign to Tracking
Objects in the Objects tab. There is
also a handy All Tags Off switch to allow the User to power down all Stagetracker II™
Tags in vicinity to save power.
All Stagetracker II™ systems are delivered with a show file populated with the Stagetracker II™ Tags that comes with the
initial shipment. Stagetracker II™ Tags sent after the initial configuration must be entered by the User in the Stagetracker II™
Controller.
5.3.6
Settings
The Settings tab holds all user accessible settings for the Stagetracker II™ system. Here the User can find functionality lik
e
raw data logging, fine tuning of tracking parameters and debugging tools (after consultation with TTA).