PD-20001-R1
Stagetracker II User Manual
16
5.4
Stagetracker II™ Core web panel
The Stagetracker II™ Core web panel holds information about the running system, and the settings for show file and
software management. These are all the functions of the web panel:
•
Monitor system processes.
•
Show file man
agement. Load, copy, delete, download, and upload show files to the Stagetracker II™ system.
•
Software management. Load, delete and upload Stagetracker II™ Core software to the Stagetracker II™ system.
•
Download the Stagetracker II™ Controller.
•
Download raw tracking data logs. These are used by TTA for debugging.
•
Download system logs for debugging.
•
Restart the Core processes.
•
Reboot the Core.
5.4.1
Show file management
Within the show file manager, the User can load, copy, delete, download, and upload show
files to the Stagetracker II™
system. This manager is found at the top of the web panel, right beneath the monitor panel for the system processes.
5.4.2
Software management
To upgrade the Stagetracker II™ Core software you upload the new version to the web panel
as described in
chapter 8.2.4. Software versions can be rolled back and forth with just a few clicks and will always be available
if they are not deleted by the User. TTA recommends to always use the latest version for the best tracking
result, features and stability.
5.4.3
Download the Stagetracker II™ Controller
Downloading the Stagetracker II™ Controller is described in chapter
8.2.2. Only the system compatible
Stagetracker II™ Controller version will be available for download.
5.4.4
Download raw tracking data logs
TTA can request the User to create and send logs for off-site fine tuning. The system can do raw data logging
and is described in chapter 9.6.2.
To download a raw data log, go to the Raw data download section
in the Stagetracker II™ Cor
e web panel, click
Dump file and then Download. Send the downloaded file to TTA for debugging and analysis.
5.4.5
Download system logs for debugging
TTA can request the User to create and send logs for off-site debugging. To download a system log, go to the
link found at the bottom of the web panel and either copy the contents of the web page, or print the page to
PDF before sending the result to TTA.
5.4.6
Restart Core processes
At the bottom of the Stagetracker II™ Core web panel there is a button to Restart Core pro
cesses. The button
restarts the system processes and is a way of quickly cleaning up if the system seems to be acting up. If the
system runs slow, we recommend doing this and restarting the computer.
5.4.7
Reboot the Core
There is also a button to reboot the Sta
getracker II™ system. As with other electronics the system sometimes
needs to do a reboot to feel fresh.
