PD-20001-R1
Stagetracker II User Manual
7
4
Stagetracker II™ h
ardware
4.1
Stagetracker II™ Core unit, front panel
Figure 1 Stagetracker II Core unit, front panel
The touchscreen on the front panel displays the following information:
•
Stagetracker II™ Core status
•
Current software version
•
IP-address of the unit
•
Temperature of the CPU
•
Power on/off button
The beacon
controlling the Tags is located onboard the Stagetracker II™ Core unit.
The antenna found on the front panel is for beacon/Tag communication (this antenna is not for tracking data purposes).
4.2
Stagetracker II™ Core unit, rear panel
Figure 2
Stagetracker II™ Core unit, rear panel
On the rear panel there are two network connectors and one powerCON™ connector for mains power along with the serial
number of the unit.
The left network connector is marked «Stagetracker Network». This connector connects to any of the connectors marked
«Stagetracker Network» located on the rear panel of the Stagetracker II™ Net unit.
The right connector is marked «Tracking Data Interface / LAN ».
This connector connects to the Position Consumers, in most configurations a switch to which other customer hardware is
connected. It
’s
also where a computer is to
be connected for setup and configuration of the Stagetracker II™ system.
See figure 14 for detailed link connections.
For all ethernet connections, use ethernet cables that meet the Cat5e standard or higher.
Ventilation
The Stagetracker II™ Core uses fans for cooling.
Adequate space must be left for air flow around fans and vents when in use.