2
THANK YOU VERY MUCH FOR CHOOSING OUR MANUAL
FURNITURE MOVER.FOR YOUR SAFETY AND CORRECT
OPERATION, PLEASE CAREFULLY READ THE MANUAL BEFORE
USE.
NOTE:
All of the information report herein is based on date available
at the time of printing. The factory reserves the right to modify its
own products at any time without notice or incurring in any sanction.
Please verify with the factory for possible updates.
1. Application
The manual furniture mover has been developed for lifting and
shifting wooden furniture. Foe this reason, its side supports are lined
with felt and the platforms with rubber. The securing straps have also
edge-protectors, to prevent damage to the furniture.
Since the hydraulic furniture mover consists of two units, it is possible
to move pieces of furniture of varying lengths but a rectangular base
using the minimum of space. Due to its weight, the anti-slip covering
on the platforms and the teeth on the platform tips, the piece of
furniture will hold itself in position when the units are standing
vertically and lower supports are in contact with its sides.
The securing strap is an additional absolute necessity.
The hand crank is turned clockwise to lift the platforms and in the
opposite direction to lower again.
Using an old crate, try a few
“
dry runs
”
with the transport units
moving furniture with them.
If you operate properly, our hydraulic furniture mover will help you to
move switch cabinets, furniture, and etc. quickly and safely.
2. Specifications
Load Capacity
Lifting Height
Lifting Plate Size
New Weight
600 kg
300 mm
225
×
120mm
33kg
3. Assembly
Every transport unit consists of three separate component groups;
the frame, the platform, and the lifting mechanism.
First remove a platform from the box, and place it on the floor. Then
insert the spindle mechanism through the upper opening and the slot
in the profiled guide rail, until the mechanism’s locating projection is
